Model No.: LT304
Lutong 30HP 4WD Tractor parts LT304 small farm tractor
Features of Lutong 30HP 4WD tractor parts LT304 small farm tractor
Lutong-300/350/304/354 wheeled tractors are independently developed by Luoyang Lutong agriculture equipment limited company, which have the domestic advanced level of similar models.
Adopt Yangdong engine, good reliability, large reserves of torque, low fuel consumption, high economic efficiency;
Gearbox using 4 × (2 +1) engaging sleeve, shuttle-action gearshift , there are 8 forward gears, 4 reverse gears, reasonable match between the gears, and have high efficiency;
Using an independent power output device, smooth transmission, large capacity, speed (540/720, 540/1000 rev / min) for selection to meet the complex operational requirements;
Using an independent circuit of hydraulic steering control system, manipulating flexible, reliable, and save energy;
Using disc brakes, a large braking torque, the braking effect is good;
Final drive with planetary gear mechanism, compact structure, large reduction ratio;
The new streamlined appearance, generous, modern, fashion;
Parament of Lutong 30HP 4WD tractor parts LT304 small farm tractor
Tractor Model | LT300 | LT350 | LT304 | LT354 | |
Driver Type | 4×2 | 4X2 | 4X4 | 4X4 | |
Dimension L×W×H(mm) | 3590X1485X1940 | ||||
Wheel base(mm) | 1705 | 1760 | |||
Front wheel tread(mm) | 1100-1400 | 1200 | |||
Rear wheel tread(mm) | 1100-1400 | ||||
Mini ground clearance(mm) | 1410 | 1480 | 1620 | 1640 | |
Mini turning radius | Unilateral brake(m) | 2.8 | |||
Not unilateral brake(m) | 3.2 | 3.4 | |||
Mini Using Weight(KG) | 1410 | 1480 | 1620 | 1640 | |
Numbers of the gear | 8F+4R | ||||
Speed | Forward(kw/h) | 2.07-27.08 | 2.25-29.53 | 2.07-27.08 | 2.25-29.53 |
Reverse(kw/h) | 3.07-9.35 | 3.34-10.20 | 3.07-9.35 | 3.34-10.20 | |
Engine | Model | YD485T-C075 | YND490T-C053 | YD485T-C075 | YND490T-C053 |
Marked power (KW) | 22.1 | 25.7 | 22.1 | 25.7 | |
Rated revolution (r/min) | 2200 | ||||
Tires type | Front | 5.5-16 | 6.5-16 | 7.5-16 | |
Rear | 11.2-24 | 11.2-28 | 11.2-24 | 11.2-28 | |
Steering | Hydraulic front wheel steering | ||||
Max. lifting capacity( KN ) | 5 | 5.8 | 5 | 5.8 | |
PTO | Type | Postposition, No Detached | |||
Speed (r/min) | 540/1000 6 Spine | ||||
Power(kw) | ≥18.78 | ≥21.85 | ≥18.78 | ≥21.85 | |
Control type of plough depth | Force & Position Control | ||||
Front / rear Ballast (kg) | 80/80 | 80/100 | 80/80 | 80/100 | |
Notice: All above parameters are subject to change without notice because of rapid development of products. |
Product Categories : Agricultural Machinery > Tractor