Model No.: Cdm812D
Overall Data
|
| Steering System | ||||||||
Bucket Capacity (m3) | 0.5 | Type Hydraulic Load Sensor System | ||||||||
Rated Payload (kg) | 1200 | Cylinders-bore x Stroke (mm) | 2-63X280 | |||||||
Operating Weight (kg) | 4350 | Steering Pump Shared With Working Pump | ||||||||
Traction Force (kN) | 31 | System Pressure (MPa) | 14 | |||||||
Breakout Force (kN) | 36 | Steering Angle | ±35° | |||||||
L×W×H(mm) | 5376×1630×2600 |
| ||||||||
Travel Speeds (km/h): | Hydraulic System | |||||||||
| Ⅰ | Ⅱ |
| Lift Cylinders-bore x Stroke (mm) | 2-80X610 | |||||
Forward | 8.3 | 20.8 |
| Tilt Cylinder-bore x Stroke(mm) | 1-100X450 | |||||
Reverse | 8.3 | 20.8 |
| Working Pump | Gear Pump | |||||
Engine | CHANGCHAI-490B | Flow Rate (L/min/rpm) | 120/2400 | |||||||
Rated Power (kW·hp)/rpm) | 38·(52)/2400 | System Pressure (MPa) | 16 | |||||||
Rated Torque (Nm/rpm) | 173/1800 | Hydraulic Cycle Time, Rated Load in Bucket (In Second): | ||||||||
Starting Voltage (V) | 24 | Raise(Loaded) | Dump | Lower(Empty) | Total | |||||
Drive Train | 4.5 | 1.2 | 2.2 | 7.9 | ||||||
Torque Converter | Single-stage, Single-turbine, 3-element | Electrical System | ||||||||
Torque Ratio | 3.7 | System Voltage (V) | 24 | |||||||
Transmission | Fixed Shaft Hydraulic Shift Spur Gear | Battery(2 in series) (Ah) | 180 | |||||||
Gear | 2F/2R | Lamp Voltage (V) | 24 | |||||||
Pressure of Transmission (MPa) | 1.2-1.5 | Service Refill Capacity | ||||||||
Main Reducer | Spiral Bevel Gear Single-stage Reduction | Fuel Tank (L) | 80 | |||||||
Final Reducer | Planetary Reduction | Hydraulic Tank (L) | 80 | |||||||
Tire | 11.00-16 | Transmission (L) | 16 | |||||||
Brake System | Front Axle (L) / Rear Axle (L) | 8/8 | ||||||||
Service Brake | Air Drive, Four Wheel Brake (Dry) | |||||||||
Setting Pressure (MPa) | 0.78 | |||||||||
Parking & Emergency Brake | Flexible Shaft Controlled Caliper |
Product Categories : NEW GROUP